When using an imported 3D component, it is possible to set the offset height of the part. I have Protocase Designer set to use millimetres, hence the OffsetHeight field is displayed in mm. However, when I enter data in this field, the input seems to require inches - for instance, entering "1" will result in 25.4mm being displayed, "2" results in 50.8mm and so on.
Can this bug be added to the queue to be fixed?
3D Component OffsetHeight Input Units
Moderators: cduffney, akirk, mpyne, mrodden
-
hallrafting
- Posts: 1
- Joined: Sun Oct 26, 2025 10:54 pm
Re: 3D Component OffsetHeight Input Units
You’re right — the OffsetHeight field currently interprets values as inches even when the app is set to millimetres. We’ve logged this as a bug for the dev team.patrick_keys wrote: ↑Tue Mar 12, 2024 4:07 amWhen using an imported 3D component, it is possible to set the offset height of the part. I have Protocase Designer set to use millimetres, hence the OffsetHeight field is displayed in mm. However, when I enter data in this field, the input seems to require inches - for instance, entering "1" will result in 25.4mm being displayed, "2" results in 50.8mm and so on snow rider.
Can this bug be added to the queue to be fixed?
For now, you can work around it by entering the value in inches (1 inch = 25.4 mm) until a fix is released.