DE-9 ?
Moderators: Colin, dronne, mpyne, akirk, mrodden
-
- Posts: 2
- Joined: Tue Nov 05, 2019 4:53 pm
DE-9 ?
Is there a DE-9 (aka 9-pin D) cutout? I've searched and looked but don't see one
Re: DE-9 ?
Hi John,
My name is Mark, with Designer Support.
I think what you are looking for is called a DB9 in our cutout library.
Hope this helps, and thanks for using Designer!
Mark
My name is Mark, with Designer Support.
I think what you are looking for is called a DB9 in our cutout library.
Hope this helps, and thanks for using Designer!
Mark
-
- Posts: 2
- Joined: Tue Nov 05, 2019 4:53 pm
Re: DE-9 ?
Hi Mark,
I did eventually find it. After some research, I'm led to believe that DB-9 is the wrong name, but everyone uses it.
Thanks,
John
I did eventually find it. After some research, I'm led to believe that DB-9 is the wrong name, but everyone uses it.
Thanks,
John
Re: DE-9 ?
Hi John,
Thanks for the reply.
I believe you are right about the incorrect name being used.
We'll add that to the name in the library, to make it easier to find in the future!
Thanks,
Mark
Thanks for the reply.
I believe you are right about the incorrect name being used.
We'll add that to the name in the library, to make it easier to find in the future!
Thanks,
Mark