Flanged Bracket Template
Posted: Fri Jul 29, 2022 3:32 pm
Hello,
I am trying to create a part with the Flanged Bracket Template. The design considerations indicate that Height must be > 0.29" for metal thicknesses < 0.075", but the Dimensions dialog will not let me set the Height value less than 1". I am using v6.0.19.
I am trying to create a part with the Flanged Bracket Template. The design considerations indicate that Height must be > 0.29" for metal thicknesses < 0.075", but the Dimensions dialog will not let me set the Height value less than 1". I am using v6.0.19.