Printing From Face Editor
Moderators: Colin, dronne, mpyne, akirk, mrodden
-
- Posts: 2
- Joined: Wed Mar 11, 2020 3:47 pm
Printing From Face Editor
I am using 4.9.7 on WIN10. I cannot print from the Face Editor, clicking on Print To Scale does nothing at all. I can print from 3D View with no problem but this results in a lot of paper. Any help appreciated.
Re: Printing From Face Editor
Hey nprior,
Thank you for finding this and we will be releasing a fix. I'll let you know.
Matt
Thank you for finding this and we will be releasing a fix. I'll let you know.
Matt
Re: Printing From Face Editor
Hi nprior,
We just made a release with a fix for this. Please go to https://www.protocasedesigner.com/download/ and download and install.
Matt
We just made a release with a fix for this. Please go to https://www.protocasedesigner.com/download/ and download and install.
Matt
-
- Posts: 2
- Joined: Wed Mar 11, 2020 3:47 pm
Re: Printing From Face Editor
Thank you, now works from Face Editor. But doesn't work from Library Manager - Cutout Editor.
Re: Printing From Face Editor
Ah. Good catch.
Yea I don't think we intended to have this actually work from the Library Manager but it is a good suggestion. Am not sure when we will work on this but I'll let you know if we make any changes.
Thanks
Yea I don't think we intended to have this actually work from the Library Manager but it is a good suggestion. Am not sure when we will work on this but I'll let you know if we make any changes.
Thanks