DE-9 ?

For general Protocase Designer questions. Anything and everything about Protocase Designer except support questions.

Moderators: Colin, dronne, mpyne, akirk, mrodden

Post Reply
john_schindler
Posts: 2
Joined: Tue Nov 05, 2019 4:53 pm

DE-9 ?

Post by john_schindler »

Is there a DE-9 (aka 9-pin D) cutout? I've searched and looked but don't see one

mrodden
Posts: 31
Joined: Mon Mar 05, 2018 10:18 am

Re: DE-9 ?

Post by mrodden »

Hi John,

My name is Mark, with Designer Support.

I think what you are looking for is called a DB9 in our cutout library.

Hope this helps, and thanks for using Designer!

Mark

john_schindler
Posts: 2
Joined: Tue Nov 05, 2019 4:53 pm

Re: DE-9 ?

Post by john_schindler »

Hi Mark,

I did eventually find it. After some research, I'm led to believe that DB-9 is the wrong name, but everyone uses it.

Thanks,

John

mrodden
Posts: 31
Joined: Mon Mar 05, 2018 10:18 am

Re: DE-9 ?

Post by mrodden »

Hi John,

Thanks for the reply.

I believe you are right about the incorrect name being used.
We'll add that to the name in the library, to make it easier to find in the future!

Thanks,

Mark

Post Reply