Positionning and rotating u shape bracket in 3U enclosure

[PhD]

Hi,

We desperatly try to add a U shape bracket on the base panel of the enclosure, with no success :
- we have built the U shape sub assembly
- we recall it on the case base inside face edit window
- we place it on the right place
- we accept and close
Once back in the case, the U brackett is complitely outside the enclosure.
When we put the brackett on a dummy place to have it correctly placed on the enclosure, we protocase tells us there is some misplacement in the project.

We also have another issue in placing the U shape, we cannot rotate it to place at 90° in the enclosure. The rotate value is not taken into account.

Any idea or advice to manage this bracket placement ?

Many thanks in advance

Philippe

[Colin]

Hi Philippe,
I'm sorry for the delay in addressing your issue. In order to resolve this, I suggest first downloading the most recent version of designer (http://protocasedesigner.com/download.php).

Also, please review our written tutorial on creating and adding brackets (http://www.protocasedesigner.com/wiki/i ... g_brackets)

If this does not help solve your issue, I will need more details from you so that I can address it directly. Feel free to call Protocase at 902-567-3335 and ask for Colin, or email me directly at cpoushay@protocase.com.

Colin Poushay
-Protocase Designer Developer